Oil Level Sensor: Service and Repair

12 61 285 Removing and installing/replacing oil level sensor







Necessary preliminary tasks:
- Switch off ignition
- Unfasten oil filter cap to enable engine oil in filter to flow back into the oil sump
- Remove underbody panelling
- If necessary, remove reinforcing plate
- Drain off engine oil







Disconnect plug connection (1).
Unscrew nuts (2).
Remove oil level sensor (3).

Installation note:
Clean sealing surface on oil sump.
Replace seal on oil level sensor.







Installation note:
Top up engine oil.

Screw on oil filter cover tightly.
Tightening torque 11 42 2AZ.