Fuel Pump: Service and Repair

16 14 015 - Removing and installing/replacing fuel pump with fuel level sensor





Necessary preliminary tasks:
- Remove fuel filter Service and Repair.





Disconnect fuel line (1).





Disconnect plug.
To do so, bend lug (1) on both sides outwards and pull plug apart.





Disconnect line (2) from fuel pump.
Unlock fuel pump by pressing lug (1).
Release fuel pump upwards from catch.
Remove fuel pump with sensor through service aperture.

Installation:
When installed, fuel pump must clearly be heard to snap into place.
Do not bend sensor arm during installation.
Line (2) must not be kinked!