Manifold Pressure/Vacuum Sensor: Service and Repair

13 62 010 - Removing and installing/replacing differential pressure sensor (N52K)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Release screws.
Tightening torque 13 62 4AZ 13 62 Senders for Control Unit.
Unlock plug (1) and remove.
Pull differential pressure sensor (2) out of intake air manifold.





Installation Note:
Read out fault memory of control unit of Digital Motor Electronics (DME).
Check stored fault message.
Now clear the fault memory.