51 48 ... Removing and Installing/Replacing Sound Insulation on Cowl Panel or Windscreen

51 48 ... Removing And Installing/Replacing Sound Insulation On Cowl Panel Or Windscreen

Special tools required:







Sound insulation can only be replaced with the following removed:
- Instrument panel or
- Windscreen







IMPORTANT: Press down, or with replacement bond, expanding foam tape (5) just before installing the windscreen (2) with special tool 51 0 300. Relaxed expanding foam tape could crush cement bead (3) (leaks, wind noises).

Replacement:
Stick new expanding foam tape (5) on sound insulation (7) along press-down elements (6).

Expanding foam tape (5) may only be stuck up to corner point of sound insulation (7).

1 Dashboard trim panel
2 Windscreen
3 Adhesive bead
4 Retaining strip, bottom
5 Expanding foam tape (sound insulation, cowl panel)
6 Press-down for sound insulation (7)
7 Sound insulation, bulkhead upper section
8 Side frame