41 5. ... Removing and Installing Door

41 5. ...Removing And Installing Door







IMPORTANT: Do not damage adjoining body parts.

The illustrations are schematic representations and are to be applied to the relevant vehicle type.

Open door.







Release screw on connector frame.

Front door:

Tightening torque 41 51 4AZ.

Rear door:

Tightening torque 41 52 4AZ.

NOTE: Secure door against closing.







Release screw (1) on door retainer.

Front door:

Tightening torque 51 21 3AZ.

Rear door:

Tightening torque 51 22 3AZ.







IMPORTANT: Secure door against falling out.

Release screws between both hinge elements at top and bottom.

Pull both screws out of hinges.

Front door:

Tightening torque 41 51 1AZ.

Rear door:

Tightening torque 41 52 1AZ.







Pull out door sideways and place it on a suitable surface.







Pull plug connection from door pillar, unlock by pulling out bar and detach.


Installation:
If necessary, adjust door.