Body - Windshield Urethane Sealant Information

SI B51 29 09
Body Equipment

February 2012
Technical Service

This Service Information bulletin supersedes S.I. B51 29 09 dated September 2009.

[NEW] designates changes to this revision

SUBJECT
1-Hour Windshield Urethane

MODEL
All

INFORMATION

[NEW] A "1-hour" system windshield urethane is currently available (P/N 83 19 2 223 012) and should be used in place of the previous "1-day" system, (P/N 83 19 0 444 141).

The primary advantage to the "1-hour" system is a significantly quicker curing time.

The properties of the "1-hour" system are comparable to that of the "1-day" system, but the curing time is reduced by 1 hour.

The "1-hour" system is applied at room temperature and with the same procedure as the "1-day" system.

For additional details and precautions regarding the use of the "1-hour" urethane for windshield replacement, refer to Repair Instruction REP 51 31... "Instructions on gluing windscreen"

WARRANTY INFORMATION
For information only