52 13 040 Removing and Installing/Replacing Outer Cover on Left or Right Front Seat Backrest (Normal / Manual)

52 13 040 Removing and installing/replacing outer cover on left or right front seat backrest (normal / manual)

Special tools required:







Necessary preliminary tasks:
- Remove front seat

NOTE: Picture shows installed seat by way of example.







Raise lock (3) and lever out handle
1. for backrest angle adjustment and
2. for seat height adjustment

with special tool 00 9 317.







Release screw (1).
Tightening torque 52 10 06AZ.

NOTE: Trim (2) is engaged in marked area.

Press lock (3) and pull trim (2) off seat mechanism.
If necessary, lever out carefully with special tool 00 9 317.







If necessary, unlock plug connection (1) for backrest width adjustment and disconnect.
If necessary, unlock plug connection (2) for lumbar support and disconnect.







Replacement:
If necessary, remove backrest width adjustment switch and lumbar support switch.

Installation:
Make sure backrest width adjustment and lumbar support switches are correctly engaged.