11 41 000 Removing and Installing/Replacing Oil Pump

11 41 000 - Removing and installing oil pump (N54)





Special tools required:
- 11 0 300





Necessary preliminary tasks:
- Remove oil sump





Release screws (1).
Tightening torque 11 41 1AZ. Mechanical Specifications

Installation:
Replace aluminium screws.

Remove intake pipe (2) in direction of arrow.





Secure oil pump drive gear with special tool 11 0 300 to oil pump.

Important!
Release central bolt (2) with special tool 11 0 300 only.

Tightening torque 11 41 4AZ. Mechanical Specifications





Release screws (2).
Tightening torque 11 41 3AZ. Mechanical Specifications





Release screws (1).
Tightening torque 11 41 2AZ. Mechanical Specifications

Installation:
Replace aluminium screws.





Pull of drive gear (1) in direction of arrow.

Note:
Timing chain (3) of triangular drive is pressed upwards by chain tensioner.
Do not remove drive gear.

Remove oil pump (2) in direction of arrow.





Installation:
Check spacers (1) for damage and firm seating.
Replace spacers (1) if necessary.

Align twin surface (3) on oil pump (2) to drive gear.

Install oil pump (2).





Assemble engine.