Roof and Associated Components: Service and Repair

41 63 060 Removing and installing soft top compartment lid

Special tools required:







Necessary preliminary work:
- Connect battery charger.
- Open rear module.







Clip special tool 54 0 240 onto hydraulic cylinder on left and right.

IMPORTANT:
- The opening in the assembly support must face towards the rear of the vehicle.
- Risk of damage.

Remove special tool after completing work.







Open tailgate with ignition key.

IMPORTANT: Risk of damage.







Tape off tailgate (1) in area shown (2) on both sides with plastic adhesive tape.







Carry over the work step shown symmetrically to the other side of the vehicle.
Pay attention to spacer plates.
Unfasten screws (2). Tightening torque, 41 63 1AZ.
Remove soft top compartment lid (3).

Installation note:
- To pre-adjust, mount the soft top compartment lid at the screw impressions on the hinge.
Adjust soft top compartment lid.