Removing and Installing/Replacing Left or Right Tail Light (on Rear Lid)

63 21 183 - Removing and installing/replacing left or right tail light (on rear lid)





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove panel on rear lid





Disconnect plug connection (1).
Release nut (2) and remove with retaining bar (3).
Tightening torque 63 21 3AZ Specifications.
Remove rear light.

Installation Note:
Position lugs (4) of rear light exactly over side edge of rear lid.
Make sure retaining bar (3) is correctly seated on rear lid.





Replacement:
If necessary, remove bulbs Service and Repair.