25 11 211 Replacing Shift Arm For Shift Lever Mount

25 11 211 - Replacing shift arm for shift-lever mount





Necessary preliminary tasks:
- Remove shift lever 25 11 000 Removing and Installing Shift Lever
- Remove transfer case(AWD)





Lever support bearing (1) out of fixture.






Installation:
Install support bearing (1) with arrow (2) facing upwards in holder.





Unlock bearing pin (1) in direction of arrow and remove.

Installation:
Grease bearing pin.
Grease, refer to BMW Service Operating Fluids.





Remove shift arm.
Detach support bearing (1) from shift arm.

Installation:
Grease bearing journal.
Grease, refer to BMW Service Operating Fluids.
Attach support bearing (1) with opening (3) towards rear on shift arm.





Replace bearing bush if damaged.
Press out bearing bush.
Coat new bearing bush with Circolight and then press into shift arm until side flanges of bearing bush protrude uniformly.
Circolight, refer to BMW Parts Service.