Replacing Left Backrest Cover for Rear Seat

52 26 411 - Replacing left backrest cover for rear seat





Special tools required:
- 52 0 050 52 0 050 Pliers






Necessary preliminary tasks:
- Remove left backrest cover Removing and Installing/Replacing Both Backrests For Rear Seat
- Remove guide sleeves Removing and Installing/Replacing All Guide Sleeves for Rear Head Restraints
- Remove lock trim and trim for release lever Removing and Installing/Replacing Lock For Left or Right Rear Seat Backrest
- Remove ski bag Removing and Installing/Replacing Ski Bag With Casing on Rear Seat (Through-Loading System)





Release screws.
Lift out trim.





Feed belt strap out of trim.





Release screw (1).
Tightening torque 52 26 04AZ 52 26 Rear Seats (Through-Loading System).
Remove outer mount (2).





Lever out backrest cover all round.





Lever cover with trim wire (1) out of metal claws (2) all round from opening for centre armrest.
Remove backrest cover with padding from backrest frame.





Detaching cover and padding:
- Release all retainers in marked area
- Remove cover from padding
- Remove remaining retainers from cover and padding

Installation:
Insert new retainers with special tool 52 0 050 52 0 050 Pliers.
In so doing, enclose wire in padding and trim wire of cover.





Replacing cover:
- Remove all trim wires from cover
- If necessary, cut pockets in new cover for trim wires
- Push trim wires into cover pockets