27 10 020 Installing Distributor Exchange Transmission (ATC 300)

27 10 020 Installing Distributor Exchange Transmission (ATC 300)







IMPORTANT: Before after replacement, execute the "Repair" service function with the BMW diagnosis system.







Recycling:
Catch and dispose of escaping transmission oil. Observe country-specific waste disposal regulations







IMPORTANT:
After completing work, check transmission oil level and top up if necessary.
Release filler plug (1).
Check oil level.
Tightening torque 27 00 11AZ.
Pour in transmission oil up to lower edge of opening for filler plug (1).
Use only the approved transmission oil

Failure to comply with this requirement will result in serious damage to the transfer box.







Necessary preliminary tasks:
- Drain transmission oil at oil drain plug
Tightening torque 27 00 11AZ.

- Remove transfer box







Modify following parts:
- Covers and protective caps
- Drive shaft transportation retainer
- Vent hose of transfer box

���:

��:

%0�: