Rear Bumper Reinforcement: Service and Repair

51 12 050 - Removing and installing/replacing carrier for rear bumper trim





Important!
During replacement, all the cavities of the carrier (1) and the crashbox (2) must be sealed with cavity sealant.





Necessary preliminary tasks:
- Remove bumper trim





If necessary, release rubber mount (1) on carrier (2).
Unscrew nuts (3).
Remove carrier (2).
Tightening torque 51 12 1AZ.

Installation Note:
If necessary, replace faulty sheet nuts (4).

Replacement:

If necessary, modify or replace weight on carrier (2).