64 11 829 Replacing Actuator Drive of Ventilation Flaps

64 11 829 - Replacing servodrive for ventilation flaps (automatic A/C)





Important!
Servomotors must be re-addressed in the event of replacement!
Addressing can only be carried out with the BMW diagnosis system.
Service functions:
- Body
- Heating and A/C function
- Flap motors
- Re-address flap motors





Necessary preliminary tasks:
- Remove right glovebox with housing 51 16 366 Removing and Installing Right Glovebox With Housing





Unfasten plug connection (1) and disconnect.
Release screws (2).
Detach servodrive for ventilation flaps (3) in direction of arrow from heater/air conditioner (4).

Installation Note:
Place servodrive for ventilation flaps (3) over guide pin (5).