Removal and Replacement

17 11 046 - Removing and installing / replacing module carrier





Necessary preliminary tasks:
- Remove coolant cooler Removing and Installing Radiator
- If necessary, slacken power steering cooling coil; refer to Removing power steering cooling coil

- If necessary, slacken A/C condenser and secure against damage and against falling down. Refer to Remove A/C condenser Service and Repair.





Release damping pieces.





Press lock (1) and remove holder (2) downwards.
Illustration shows the left holder: The same procedure applies to the opposite side.

Installation:
Rubber mounts fall out easily, ensure correct installation position.

S65 only: Engine oil cooler loose, see Removing oil cooler.





Remove module carrier (1) individually towards bottom.





When replacing module carrier:
Convert power steering cooling loop.