| Standard Hours | Manufacturer Warranty Hours | Skill Level | Notes |
Diagnose/Test |
Oil Leak, Diagnosis | 1.0 | 0.0 | B | |
General Troubleshooting And/Or Repair |
Thirty Minutes | 0.5 | 0.0 | A | |
One Hour | 1.0 | 0.0 | A | Add Additional Increments As Required. |
Two Hours | 2.0 | 0.0 | A | Add Additional Increments As Required. |
Note |
Additional Thirty Minutes, Add | 0.5 | 0.0 | A | |
Replace |
Complete Assembly Without Transfer Of Parts |
Manual Trans | 12.3 | 8.9 | B | Does Not Include: Transfer Of Any Part Of Engine Or Replacement Of Optional Equipment. |
Auto Trans | 13.3 | 9.7 | B | Does Not Include: Transfer Of Any Part Of Engine Or Replacement Of Optional Equipment. |
Complete Assembly With Transfer Of Parts |
Manual Trans | 17.4 | 12.5 | B | Includes: Transfer All Fuel And Electrical Units. Does Not Include: Transfer Of Optional Equipment. |
Auto Trans | 18.3 | 13.1 | B | Includes: Transfer All Fuel And Electrical Units. Does Not Include: Transfer Of Optional Equipment. |
Short Block |
Manual Trans | 24.4 | 0.0 | B | Includes: R&I Engine And Transfer All Necessary Components. |
Auto Trans | 26.5 | 0.0 | B | Includes: R&I Engine And Transfer All Necessary Components. |
Long Block |
Manual Trans | 21.4 | 0.0 | B | Includes: R&I Engine And Transfer All Necessary Components Not Supplied With Long Block. |
Auto Trans | 23.5 | 0.0 | B | Includes: R&I Engine And Transfer All Necessary Components Not Supplied With Long Block. |
Overhaul/Rebuild |
Manual Trans | 30.6 | 21.9 | B | Includes: Disassemble & Clean Engine, Ridge Ream & Hone Cylinders, Fit Pistons, Rings, Pins, Main & Rod Bearings, R&I Engine, Grind Valves & Tune-Up. |
Auto Trans | 31.5 | 22.5 | B | Includes: Disassemble & Clean Engine, Ridge Ream & Hone Cylinders, Fit Pistons, Rings, Pins, Main & Rod Bearings, R&I Engine, Grind Valves & Tune-Up. |