Fuel System - Fuel Pressure Control Test Plan Error

SI B13 02 13
Fuel Systems

March 2013
Technical Service

SUBJECT
N54 Engine: Fuel Pressure Control Test Plan Error

MODEL
F01

F02

E82

E88

E89

E90

E92

E93

E60

E61

E71

SITUATION
Two errors may be encountered when performing Test Plan B1214_DI6KDR - Fuel Pressure Control with the current version of ISTA/D:

^ On the last step when the diagnosis code is displayed, the test plan may state to replace the fuel low-pressure sensor and that a Bosch sensor will need to be installed.

^ The right side of the test plan screen will provide two incorrect pictures and statements describing the fuel low-pressure sensors.

All of the statements related to the identification of the fuel low-pressure sensor are incorrect. Replace the fuel low-pressure sensor that is identified in ETK only after entering the vehicle identification number. Do not replace the metal fuel line with this pressure sensor.

This error will be corrected in ISTA/D 3.39.0.

WARRANTY INFORMATION
Not applicable.