52 26 411 Replacing Backrest Cover For Left Rear Seat

52 26 411 Replacing Backrest Cover For Left Rear Seat







Special tools required:
- 52 0 050







Necessary preliminary tasks:
- Remove left rear seat
- Remove guide sleeves







With seat heating only as optional equipment:
Unfasten plug connection (1) and disconnect.







Release screw (1).
Tightening torque 72 11 21AZ.







Release screws (1).
Tightening torque 52 26 06AZ.
Lift out trim.







Feed out seat belt strap (1) from cover (2).







Lever out welt in marked area of rear panel.







Remove backrest cover with padding.
Feed out seat belt strap (1) from backrest cover.







Detaching cover and padding:
- Release all retainers in marked area
- Remove cover from padding
- Remove remaining retainers from cover and padding

Replacement only:
- Pull all trim wires out of cover
- If necessary, cut pockets in new cover for trim wires
- Push trim wires into cover pockets







Installation:
Insert new clamp (2) with special tool 52 0 050 and bend closed.
1. Padding
2. Retainer
3. Trim wire in padding
4. Trim wire in seat cover
5. Backrest cover

�Ҋ":