41 5. ... Removing and Installing Door

41 5. ... Removing And Installing Door







IMPORTANT: Do not damage adjoining body components.

The graphics are schematic representations and are to be applied to the relevant vehicle type.
Open door.







Release screw on connector frame.
Front door: Tightening torque 41 51 4AZ.
Rear door: Tightening torque 41 52 4AZ.







NOTE: Secure door against closing.

Release screw (1) on door stop.
Front door: Tightening torque 51 21 3AZ.
Rear door:
Tightening torque 51 22 3AZ.
Open door up to limit position.







Release screws between both hinge elements at top and bottom.
Front door: Tightening torque 41 51 1AZ.
Rear door: Tightening torque 41 52 1AZ.







Pull plug connection from door post, unlock by pulling out bar and detach.
Unhinge door by moving upwards and placing it on a suitable surface.

Installation:
If necessary, adjust door.