Complete Center Cushion Section For Rear Seat

52 25 025 - Removing and installing complete center cushion section for rear seat





Necessary preliminary tasks:
- Remove armrest for rear seat backrest





Release screws (1).





Remove frame (1) in direction of arrow.

Installation:
Make sure retaining lugs are correctly seated in guide.
The frame must be replaced if the retaining lugs are faulty.





Disconnect spring (1).





Removing cushion section on left and right in succession:
1. Press retaining tab.
2. Press catch outwards and pull cushion section upwards.
Unclip cushion section towards rear from pivot bearing.





For a better overview, the following operation is shown with the cushion section removed.

Installation:
Make sure cushion section is correctly seated in pivot bearing.