52 25 405 Replacing Left or Right Rear Seat Cover

52 25 405 Replacing Left Or Right Rear Seat Cover

Special tools required:







Necessary preliminary work:
- Remove left or right rear seat







Lever out cover welt in marked area.
Disconnect all cable straps from wiring harness.

Installation note:
Replace defective cable straps.







Release all clamps in marked areas.







Detaching cover and upholstery:
- Release all clamps in designated areas
- Remove seat cover from upholstery
- Remove all remaining clamps from seat cover and/or upholstery







Replacing cover:
- Pull all trim wires out of seat cover
- If necessary, cut in mounting for trim wires of new cover
- Push trim wires into new seat cover







Installation note:
Bend new clamp (2) closed with pliers 52 0 050.