61 21 010 Removing and Installing/Replacing Battery

61 21 010 Remove And Install Or Replace Battery







WARNING: Observe safety information for handling the battery.







To ensure the correct safety and convenience functions, install only the original battery (battery size and type) stored in the vehicle order. Observe note on battery replacement.







Necessary preliminary tasks:
- Remove power distribution box







Fold back cover (1) as shown.
Slacken nut (2).
Tightening torque 61 21 1AZ.

IMPORTANT: Do not under any circumstances pull/lever safety battery terminal off by force.

Detach safety battery terminal towards top, lay to one side and secure.







Release screw (1) and remove holder (2).
Tightening torque 61 21 5AZ.
Detach vent hose from battery.
Pull out battery.

Installation note:
Make sure battery is correctly seated in mounting.







Replacement:
- Vehicles with intelligent battery sensor (IBS) Register battery replacement

NOTE:
If Check Control message is present:
- Delete fault memory