51 64 010 Removing and Installing/Replacing Left or Right V-support

51 64 010 Removing And Installing/replacing Left Or Right V-support







IMPORTANT: Driving without the V-support is not permitted (risk of damage to the body).







Necessary preliminary work:
- Remove front bumper panel.

Not in the case of 12-cylinder models:







Undo screw connection (1) on V-braces (2).
Tightening torque 51 61 6AZ.

Only in the case of 12-cylinder models:







Undo screw connection (2) on V-braces.
Tightening torque 51 61 6AZ.







Undo bolt (1) on V-brace (3) on left or right.
Tightening torque 51 11 7AZ.
Manoeuvre out V-brace (3) upwards.

Installation note:
Hose pipe (2) for headlight washer system high-pressure nozzle (right) must be correctly clipped into place at marked points.

>q/�Lq/:

LB�/: