Lighting - Adaptive Headlight DTC 800FC6

SI B63 10 10
Lights

October 2010
Technical Service

This Service Information bulletin supersedes SI B63 10 10 dated July 2010.

[NEW] designates changes to this revision

SUBJECT
CC Message: Adaptive Headlights

MODEL
F07 (5 Series)
F01, F02, F04 (7 Series)

Vehicles produced up to February 28, 2010

SITUATION

[NEW] A Check Control (CC) message is displayed for the adaptive headlights. The headlamps no longer turn with steering wheel movement. Fault code 800FC6 is entered in the Footwell Module (FRM3).

CAUSE

A second turn signal request is made at the exact moment when the steering wheel is automatically cancelling from a previous turn signal request.

The sequence of events is as follows:

^ The turn signal is indicated in one direction.

^ The vehicle makes the turn.

^ As the steering wheel begins to straighten, the turn signal is cancelled automatically.

^ At the exact moment the turn signal is cancelling, the turn signal is indicated in the opposite direction.

^ Intermittently the CC message is displayed.

CORRECTION
[NEW] Program the vehicle using ISTA/P 2.39.0 or later.

Note that ISTA/P will automatically reprogram and code all programmable control modules that do not have the latest software.

For information on programming and coding with ISTA/P, refer to Centernet / Aftersales Portal / Service / Workshop Technology / Vehicle Programming.





WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.