Starter Motor: Service and Repair

12 41 020 Removing And Installing/Replacing Starter (N74)







Necessary preliminary tasks:
- Turn off ignition
- Disconnect battery negative lead
- Remove left catalytic converter







Release screws (1).
Tightening torque 12 41 2AZ.
Remove heat shield (2).







Unscrew nut (1).
Tightening torque 12 42 2AZ.
Detach battery positive lead from starter motor.
Unlock connector (2) and remove.
Release screws (3).
Tightening torque 12 41 1AZ.
Pull out starter (4) in direction of travel, feed out and remove.







Installation:
Check starter pinion and ring gear for damage. Replace damaged parts if necessary.
Reassemble the vehicle.