Removing and Installing/Replacing Trim Cover for Upper Belt Loop on Left or Right

52 14 ... - Removing and installing or replacing trim cover for upper belt loop on left or right





Lift out cover cap (1) from below with plastic wedge.





Release screw (1).

Installation:
Replace screw (1).

Remove finisher.





Remove belt guide - build date (version) from 09/08:

Note:
Protect belt guide against damage (scratches).
Trims of belt guide at front and rear (1) are destroyed when removed!

Installation:
Pay particular attention to cutting line between both trims.
If the trims are not fully clipped into place, this will result in grinding noises when the belt is pulled.





Release screw on belt guide.
Tightening torque 72 11 03AZ. Specifications





Release further screw on belt guide and detach belt guide.
Remove complete seat belt with belt guide, inertia reel with flex shaft and coupling gear.
Do not kink flex shaft and do not transport inertia reel by flex shaft.