Replacing Drive/Electronics Box for Left Adaptive Headlight

63 12 895 - Replacing drive/electronics box for left adaptive headlight





Warning!
Version with xenon headlights: Danger to life due to high voltage! Therefore, before removing, disconnect all components from the power supply (lighting system and ignition off).
Work on the entire xenon lighting system (ignition unit, control unit and lamp) may only be carried out by specialist personnel.





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Remove left headlight Removing and Installing/Replacing Left Headlight (Adaptive Headlight)





Note:
Operation is shown by way of example on the E70.
Release screws (1). Tightening torque 63 12 5AZ Specifications.

Remove drive/electronics box for adaptive headlight (2) from headlight.

Installation Note:
Make sure seal is correctly positioned on drive/electronics box for adaptive headlight (2).
Fit drive/electronics box for adaptive headlight (2) exactly on headlight.
Make sure pin housing (3) is correctly seated in plug housing (4).





Carry out vehicle programming/coding Programming and Relearning.