33 32 180 Removing and Installing/Replacing Left or Right Toe Arm

33 32 180 Removing and installing/replacing left or right toe arm





Note:
If the toe arm is detached from the rear axle support/wheel carrier, it is necessary after reinstallation to carry out a wheel/chassis alignment check.





Necessary preliminary tasks:
^ Remove rear wheel





If necessary, open cover (1) on stone guard (2).

Mark position of eccentric bolt to rear axle support.








Release bolt.

Tightening torque 33 32 8AZ.

Installation:
If necessary, turn toe arm by hand.





Release nut (1) and remove eccentric washer (2).

Tightening torque 33 32 7AZ.

Unscrew eccentric bolt towards front and remove toe arm (3).

Installation:
Bolt head points in direction of travel.

Reinstall eccentric washer.

Replace self-locking nut.

Align eccentric bolt to rear axle support by means of marking.





After installation:
^ Perform wheel/chassis alignment check

\�[ :