Removing and Installing/Replacing Rear Underbody Protection

51 47 491 - Removing and installing/replacing rear underbody protection





Warning!
Scalding hazard!
Tasks should only be carried out on an exhaust system that has cooled down.





Release screws (1 and 2).
Unscrew nuts (3).
Pull out underbody protection (4) in direction of arrow towards bottom.

Installation Note:
Ensure correct seating.
Centre underbody protection (4) before tightening down screws (1 and 2).





Replacement:
- Modify sheet nuts

Installation Note:
If necessary, replace faulty metal nuts.