Instrument Panel, Gauges and Warning Indicators: Service and Repair

61 30 020 - Removing and installing/replacing switch block (M3)





Necessary preliminary tasks:
- Remove trim for storage tray 51 16 212 Removing and Installing Trim for Storage Compartment





If necessary, remove socket housing (1) from holder (2).
Unlock catches (3) and feed switch block (4) in direction of arrow out of storage compartment trim (5).

Installation:
Make sure switch block catch (4) engages correctly in storage compartment trim (5).
If necessary, make sure socket housing (1) is correctly seated in holder (2).