66 20 560 Removing and Installing/Replacing Rear Signal Sensor (Park Distance Control)

66 20 560 - Removing and installing/replacing rear signal sensor (Park Distance Control)





Vehicles with HiFi or Top HiFi system:
No acoustic sensors fitted because the PDC control unit activates the respective speaker on the side of obstruction.






Necessary preliminary tasks:
- Remove panel for roof pillar at rear right Removing and Installing/Replacing Trim Panel For Left or Right Rear Roof Pillar (C-Pillar)
- Remove rear right mid-range speaker 65 13 188 Removing and Installing/Replacing Rear Mid-Range Speaker (In Rear Shelf)





Release screw (1).
Remove holder (2) from C-pillar (3) and feed out of rear window shelf.






Installation:
Holder (1) must snap into guide hole (2) in C-pillar.





Disconnect plug connection (1).
Remove signal sensor (2).
Replacement:
Detach signal sensor (2) from holder (3).
If necessary, mark position of signal sensor on holder.