CCC(R) - Various Issues After Replacement

SI B 65 06 06
Audio, Navigation, Monitors, Alarms, SRS

July 2009
Technical Service

This Service Information bulletin replaces SI B65 06 06 dated November 2007.

[NEW] designates changes to this revision

SUBJECT
Various Problems with CCC Following Replacement

MODEL
E90, E91 (3 Series) with SA 609 CCC Navigation

E60, E61 (5 Series) with SA 609 CCC Navigation

E63, E64 (6 Series)

SITUATION
The following symptoms may occur following the replacement of the CCC (Car Communication Computer):

^ Screen display on CID (Central Information Display) off center

^ No SVS (Voice Recognition System) function

^ No warning gongs, including PDC (Park Distance Control)

^ No audio output (all modes)

^ Various other problems

CAUSE
CCC coding

PROCEDURE
Perform the following procedure for any of the above fault symptoms which were not present previously that occur following a replacement of the CCC:

1. Disconnect the negative battery terminal for 30 minutes.

2. Reconnect the battery terminal and code the complete vehicle per SI B09 05 01 (Coding, Individualization, Programming), Procedure E, using the latest version of Progman.

3. [NEW] After the coding is complete, turn the vehicle off and let the vehicle enter sleep mode (after about 3-4 minutes, buses are idle).

4. Retest the system for proper functionality.

WARRANTY INFORMATION
Covered under the terms of the BMW New Vehicle Limited Warranty.

Defect Code Refer to KSD

Labor Operation: Refer to KSD

Labor Allowance: Refer to KSD





Disclaimer