61 31 334 Removing and Installing or Replacing Grip Trim For Gear Selector Switch

61 31 334 - Removing and installing or replacing grip trim for gear selector switch





Special tools required:
- 64 1 030





Turn circlip (1) in direction of arrow and remove.

Installation:
Make sure circlip (1) is correctly seated.





Feed special tool 64 1 030 from below into trim (1) and carefully pull off trim (1) in direction of arrow.

Remove symbol plate (2).

Installation:
To facilitate fitting, secure push-button (3) with adhesive tape on trim (1).