Backrest Cover For Rear Seat (Through-Loading System) on Left

52 26 411 - Replacing backrest cover for rear seat (through-loading system) on left





Special tools required:
- 52 0 050 Tools and Equipment





Necessary preliminary tasks:
- Remove left backrest cover Left/Right Rear Seat Backrest (Through-Loading)
- Remove head restraint locators Rear Left or Right Head Restraint Mount (Through-Loading)
- Remove ski bag Ski Bag on Rear Seat (Through-Loading System)
- Remove backrest actuator trim and lock trim Lock For Left or Right Rear Seat Backrest





Release screws (1).
Feed trim (2) out of seat belt outlet.





Lever out cover welt in marked area (1).
Lever trim wire (2) out of metal clasps (3).





Lever out welt in marked area of rear panel.
Remove backrest cover with padding.





Detaching cover and padding:
- Release all retainers in marked area.
- Remove cover from padding
- Remove remaining retainers from cover and padding





Installation:
Insert new retainer (2) with special tool 52 0 050 Tools and Equipment and bend closed.

1. Padding
2. Retainer
3. Trim wire in padding
4. Trim wire in seat cover
5. Backrest cover





Replacing cover:
- Pull all trim wires out of cover
- If necessary, cut pockets in new cover for trim wires
- Push trim wires into cover pockets