Replacing LED For Rear Inside Door Opener

63 31 193 - Replacing LED for rear inside door opener





Necessary preliminary tasks:
- Remove rear door trim Removing and Installing/Replacing Rear Left or Right Door Trim Panel





Remove sheathing of wiring harness (1) in area (A).
Cut through wiring harness (1) in area (A) and remove LED for rear inside door opener (2).

Installation:
Adapt length of wiring harness of new LED for rear inside door opener.
Connect wiring harness of new LED for rear inside door opener using butt connectors Removing And Installing/Replacing Decorative Strip On Rear Left Or Right Door Trim Panel to wiring harness (1).

Wrap wiring harness (1) in insulating tape.