Differential Assembly: Adjustments

33 00 ... Rear axle: wheel/chassis alignment check must be carried out after the following work





A wheel/chassis alignment check must be carried out after the following work:
^ Release of following screw/bolt connections:
^ Swinging arm, front/rear, to rear axle carrier
^ Swinging arm to integral link / wheel carrier
^ Integral link to wheel carrier
^ Guide arm to rear axle support
^ Wishbone to rear axle support
^ Replacement of following parts:
1. Rear axle support
2. Swinging arm
3. Integral link
4. Wheel carrier / ball joint
5. Wishbone
6. Guide arm