37 14 511 Replacing Front Ride-Height Sensor

37 14 511 Replacing front right ride-height sensor





Important!
Observe safety instructions for raising the vehicle

Note:
Jointed rod on upper control arm 37 14 5AZ.





Important!
Read and comply with notes on protection against electrostatic discharge (ESD protection).

Necessary preliminary tasks:
^ Remove front right wheel arch trim








Disconnect plug connection (1).

Release nut (2) and disconnect jointed rod.

Installation:
Sensor lever (3) must point from ride-height sensor to right front wheel.

Replace self-locking nut.

Tightening torque 37 14 4AZ.





Release bolt (1) and remove ride-height sensor with bracket.

Installation:
Align ride-height sensor holder by means of lug (2) to opening under screw (1).

Tightening torque 37 14 1AZ.

Release screws (1) and remove holder (2).

Tightening torque 37 14 3AZ.








After installation:
^ Carry out ride-height calibration
^ Check headlight adjustment, correct if necessary

�=: