Removing and Installing/Replacing Left Hood/Bonnet Lock

51 23 110 - Removing and installing/replacing left hood/bonnet lock





Unclip coupling (1) from side panel.
Lever out cover (2) at coupling (1).
Lever cable (3) out of coupling (1).

Note:
The operation "Disconnect cable for hood/bonnet lock" ends here.





Release screws (1).
Tightening torque 51 23 2AZ [1][2][3]51 23 Engine Compartment Lid Catch/Locks.





Note:
Attachment parts are shown removed for purposes of clarity.

Feed out hood/bonnet lock (1) through opening (2) towards rear.





Note:
Attachment parts are shown removed for purposes of clarity.

Disengage Bowden cable (1) in direction of arrow from engine hood lock (2).