Removing and Installing/Replacing Drive For Rear Lid Lock

51 24 080 - Removing and installing/replacing drive for rear lid lock





Necessary preliminary tasks:
- Remove trim for rear lid lower section 51 49 090 Removing And Installing/Replacing Panel For Rear Lid Lower Section
Security vehicles:
- Remove rear lid lower section armor-plating 51 49 090 Removing And Installing/Replacing Rear Lid Lower Section Armor-Plating (Security)





Lever out cover (1), release screw underneath and remove handle (2).
Lever out cover (3) and release screw underneath.

Installation:
If necessary, replace faulty drives (1 and 2).





Disconnect Bowden cable (1 and 2).





Release screws (1) and feed out drive (2).
Tightening torque 51 24 6AZ 51 24 Rear Lid Latch, Locks.