Removing and Installing (Replacing) Control Unit/Module For Seat Heating (With 3RD Seat Row)

61 35 097 - Removing and installing (replacing) control unit/module for seat heating (rear seat with 3rd seat row) on left or right





Important!
Read and comply with notes on protection against electrostatic damage (ESD protection) 61 35 ... Notes on ESD Protection (Electro Static Discharge).





Necessary preliminary tasks:
- Disconnect battery negative lead 61 20 900 Disconnecting and Connecting Battery Negative Lead





Note:
Rear seat shown removed for purposes of clarity.

Disconnect plug connection (1).
Fold rear seat forwards and lever retaining tab (2) with a suitable tool (3) in direction of arrow.
Remove control unit/module for seat heating (4) in direction of arrow.

Installation Note:
Retaining tab (2) must be returned to its initial position.
Retaining journal (6) must not be damaged.
Feed retaining journal (6) first into seat backrest frame (5).
Make sure control unit/module for seat heating (4) is correctly engaged on retaining tab (2).