Outer Fold Trim

52 26 ... - Removing and installing outer fold trim





Necessary preliminary tasks:
- Remover inner fold trim Inner Fold Trim
- Remove outer follower trim Outer Follower Trim





Trim, fold, outer (pivot bearing):
Release screw (2).
Tightening torque: 52 26 25AZ 52 26 Rear Seats (Through-Loading System).
Pull off release handle (1).





Release screw.





Only for seat backrest frame, left (60 %):
Push on locking clip (1).
Pull off ball socket.





Installation:
Gas-filled strut (1) is under tension.
Lever ball socket with screwdriver on pin.





Release screw (1).
Tightening torque: 52 26 27AZ 52 26 Rear Seats (Through-Loading System).





Carefully tighten follower (2) on seat cushion frame.
Feed trim (1) out of seat mechanism.