Radiator Support: Service and Repair

41 11 516 Replace left carrier support (partial replacement, front side panel removed)







Read contents of Body, General.

For stripping and rigging operations, refer to texts on KSD CD (FR number 41 11 516).

Remove or cover those vehicle components in the repair area which are susceptible to heat or dust.

Use only approved spot-welding apparatus for repairs.

Place vehicle on straightening bench.







Following new body parts are required (refer to ETK Electronic Parts Catalogue):
- (1) Support carrier, wheel arch, front,







Open weld joints in area (1).







Open weld joints in areas (1).







IMPORTANT: Risk of damage to spring strut dome.







Mark severance cut in accordance with measurement a and cut support carrier.

Measurement a=50 mm before 20 mm dia. bore

Installation:
Adjust new part to fit with straightening attachment or universal mount.

Weld in reinforcement plate at severance cut.