Adjusting Headlights

63 10 004 Adjusting Headlights







NOTE: Observe test preconditions for adjusting headlights.







Carry out headlight adjustment at adjusting screws (1) and (2).

IMPORTANT: Turn adjusting screw (1) with a ballhead Allen key (3).

A definite allocation of adjusting screws is not possible.
1. Adjustment screw primarily for vertical adjustment
2. Adjusting screw primarily for lateral adjustment







NOTE: In isolated cases the situation may arise where adjusting screw (1) can only be turned with difficulty.

Recommendation:
Drill hole on module carrier at point (2) in shaft of adjusting screw (dia. approx. 8 mm).

IMPORTANT:
Risk of damage.
Tape off module carrier and body components when drilling.