32 31 003 Removing and Installing/Replacing Upper Section of Steering Column Trim

32 31 003 Removing and installing/replacing upper section of steering column trim

Special tools required:





Move steering column in "bottom" and "extended" position.

Important!
Risk of damage!
Unclip steering column shroud (1) at side with special tool 00 9 323.





Tilt steering column trim (1) towards front.

Unclip steering column gap cover (2) from steering column trim (1).

Installation:
Tilt steering column trim towards rear, align by way of locks to lower section (of steering column trim) and press down.