Front Door Window Glass: Service and Repair

51 32 170 Remove And Install//Replace Side Window, Front Left Or Right







Necessary preliminary tasks:
- Remove sound insulation in front door
- Remove inner window cavity cover strip







Open door window glass (1) down to distance (A)

NOTE: Open door window glass to such an extent that the sliding member of the door window glass holder is at the height of the elongated hole of the power window unit.

A = approx. 120 mm

E71:
A = approx. 80 mm







IMPORTANT:
Risk of injury by trapping.
Disconnect plug connection (1) on power window motor.

Carefully press catch (2) with screwdriver (3) towards rear and slide door window glass upwards.

Installation:
Catch (2) must be correctly clipped into place.
Carry out function check on power window unit and anti-trapping protection.
If necessary, normalise power window unit.







Turn door window glass and lift out towards rear/top.

Installation:
Door window glass does not need to be adjusted.