Hood: Service and Repair

41 61 000 Removing And Installing Hood/Bonnet







For stripping and rigging operations, refer to texts on KSD CD (FR number 41 61 000).







WARNING:
- Danger of injury.
- Support engine hood in fully opened position with suitable apparatus.







IMPORTANT: Removal of the hood/bonnet must be carried out with the assistance of a second person.







NOTE: Carry over schematic representation to the relevant vehicle type.

Release nuts (1).
Tightening torque 41 61 1AZ.
Remove hood lid.

Installation:
Install engine hood at screw locations to on hinge. This dispenses with the need for adjustment after installation.

If this is not possible, adjust engine hood.