12 36 010 Removing and Installing/Replacing Power Electronics Box

12 36 010 Removing And Installing/Replacing Power Electronics Box







WARNING: High-voltage system - danger to life.







WARNING:
The following points must be strictly observed prior to starting work:
- De-energise the high-voltage system
- Observe safety instructions for handling with hybrid vehicles







Necessary preliminary tasks:
- Remove Auxiliary Power Module (APM)
- Remove power electronics box.







Release screws (1).
Tightening torque 12 36 11AZ.
Loosen cap nuts (2).
Tightening torque 12 36 12AZ.
Unclip high-voltage lead (3).
Unclip plug (4).







Release screws (1).
Tightening torque 12 36 13AZ.
Lay power distribution box (2) to one side
Unthread and remove holder for power electronics box (3).

Installation:
Make sure cables are correctly routed without chafing.







Replacement:
Remove hybrid power distribution box.