13 62 592 Removing and Installing/Replacing Pressure Sensor on Right Intercooler

13 62 592 Removing And Installing/Replacing Pressure Sensor On Right Intercooler (N63 Hybrid)







WARNING: High-voltage system - danger to life.







WARNING:
The following points must be strictly observed prior to starting work:
- De-energize the high-voltage system
- Observe safety instructions for handling with hybrid vehicles







Necessary preliminary tasks:
- Read out fault memory of DME control unit
- Turn off ignition
- Remove fan cowl







Unlock plug (1) and remove.
Unfasten screws (2).
Tightening torque 13 62 7AZ.
Pull pressure sensor (3) out of right intercooler.

Installation:
Replace sealing ring on pressure sensor.







Installation:
Delete fault memory.