Oil Level Sensor: Service and Repair

12 61 285 Removing And Installing/Replacing Oil Level Sensor For Engine Oil (N63 Hybrid)







WARNING: High-voltage system - danger to life.







WARNING:
The following points must be strictly observed prior to starting work:
- Observe safety information for handling with hybrid cars







IMPORTANT: Read and comply with notes on protection against damage from electrostatic discharge (ESD protection).







Necessary preliminary work:
- Switch off ignition.
- Remove reinforcement plate.
- Drain engine oil.







Release connector (1) and remove.
Unscrew nuts (2).
Tightening torque 12 61 2AZ.
Remove oil level sensor (3).

Installation note:
Clean sealing surface on oil sump.
Replace gasket on oil level sensor.
An excessively low torque value will result in oil leaks.
An excessively high torque value will result in damage to the oil level sensor.
Top up engine oil.